When processing a field with a light aircraft, you do not need to spend money on fuel and maintenance personnel
Our company performs:
Timely and efficiently work to protect your crops, taking into account temperature and wind weather conditions, in optimal agrotechnical terms.
Turning to us you will save 100% of the crop
Do you want to not depend on the weather and harvest on time?
We will save you pests or weeds quickly and efficiently
Fertilizing crops to increase yield and accelerate ripening
Zlin Z-37 Cmelak
light multi-purpose aircraft, double, with a tandem arrangement of pilots. The cab is equipped with a door located on the right and opening up. Initially, the cabin was made of aluminum sheet, later — it became plastic. Equipped with unbreakable glazing of a large area.
Cessna 172
The advantage of aviation technologies over ground in high productivity, the possibility of carrying out agrotechnological processes in biologically favorable terms, the absence of mechanical damage to cultivated plants, the lack of compaction of the soil with the wheels of tractors and sprayers. The height and density of planting is not very important. Any crops are processed with high quality even in the most inaccessible places for ground equipment.
PZL M-18 Dromader
Agricultural aircraft M-18 Dromader, created on the basis of P.Z.L. 106 Kruk, was large in size and was designed and built in accordance with paragraph 23 of the US Airworthiness Standards. Its characteristic features were a direct free-carrying wing and a non-swaying stabilizer. It was equipped with a P.Z.L. engine. ASh-62IR increased power. The pilot was in a reinforced cockpit capable of withstanding an overload of 40 units. Special materials and processing have minimized glider corrosion.
The main advantages of aviation chemical work over ground
At almost the same cost as ground works
The advantage of aviation technologies over ground in high productivity, the possibility of carrying out agrotechnological processes in biologically favorable terms, the absence of mechanical damage to cultivated plants, the lack of soil compaction with the wheels of tractors and sprayers. The height and density of planting is not very important. Any crops are processed with high quality even in the most inaccessible places for ground equipment
Harvest Dates
Desiccation is the processing of crops with special agrochemical preparations, which allows to accelerate the maturation of plants due to their drying.
It often happens that cold and rainy weather in August and early September leads to significant crop losses. You can solve the problem with the help of desiccation — drying plants on the vine with the help of special agrochemicals.
Desiccation accelerates the ripening of crops, facilitates harvesting and storage of products, and the profit from its use is 3-4 times higher than costs.
An acceptable time for harvesting ripened winter crops varies within 10-12 days after the absolute maturation of grains. To start harvesting ahead of time, you will need to use different auxiliary energy costs to mow the grain in bales, and then it needs to be dried. If you start harvesting after the set time, you can also lose grain.
In order to correctly determine the time, it is necessary to take into account all the qualities of the grain, which will continue to grow on the field. To start harvesting, you need to make sure that the grain is in the stage of absolute ripening, and its moisture content reaches the desired 20%.
To harvest winter crops, several methods are used, but for Russia, the direct combining technique, which should be carried out in about a week, is most suitable. It also provides the opportunity to put into practice a separate scheme, but if the weather is bad during the harvesting process, there may be grain losses, which is why they choose a more reliable method of direct combining.
If you start to collect winter crops after the appointed time, losses can reach about 30% of the grain. And also the disease is caused by sowing disease, large weediness of the grain or germination on the field of perennial herbs.
INSECTICIDES
Harmful insects significantly reduce, and in some cases can completely destroy the crop yield. Chemicals such as insecticides are used to protect crops from harmful insects.
Insecticides (from lat. Insectum — insect and caedo — kill), chemical means of combating harmful insects.
Due to its high productivity, light aviation allows you to save pests from your fields in a short agronomic timeframe, especially when fast processing of large areas is required.
WHY WHY DO YOU NEED TO INTRODUCE INSECTICIDES BY UG AVIA
- to quickly get rid of pests in your fields;
- to preserve your crops as much as possible;
- to improve the quality of your crop;
- to increase the expected profit several times.
Application of Herbicides
A significant contribution to the process of applying herbicides is made by light aviation, which is an integral technological part in the agricultural industry.
Despite the negative environmental impact of chemicals for processing crops, without their use it is impossible to obtain high stable crop yields.
When processing fields with light aircraft of the South Avia Aviation Complex, you do not have to spend money on fuel, a large number of service personnel and multi-ton water tanks.
WHO DOESN'T NEED TO MAKE HERBICIDES
- one who has no weeds on the field;
- one who is ready to lose part of his profit from the sale of the crop;
- those who do not care about the quality and value of the crop.
DESICCATION
Desiccation is the processing of crops with special agrochemical preparations, which allows to accelerate the maturation of plants due to their drying.
It often happens that cold and rainy weather in August and early September leads to significant crop losses. You can solve the problem with the help of desiccation — drying plants on the vine with the help of special agrochemicals.
Desiccation accelerates the ripening of crops, facilitates harvesting and storage of products, and the profit from its use is 3-4 times higher than costs.